| |
|
| 产品名称： |
铭威木工雕刻机 |
| 产品规格： |
MW1325 |
详细描述：
产品简介：
①采用进口直线方型导轨，双排四列滚珠滑块,承重力大,运行平稳,精度高,寿命长.进口滚珠丝杠精度高，下刀精确。
②完全脱离计算机可远程操作的USB接口式DSP操作系统，手柄式操作，操作更简单，设计更具人性化，采用独特的智能预算法则，充分发挥电机潜能，实现高速加工,曲直线同步,曲线更完美,不占电脑内存并可实现切削主轴的自动起停。
③软件兼容性好，可兼容type3/Artcam/Castmate/文泰等多种CAD/CAM设计制作软件。
④六分区真空吸附台面，可有效针对不同大小板材进行吸附。
⑤采用高速驱动步进电机与驱动器，Y轴采用了双电机驱动，使之高速运行可达25米以上的空行速度，配合大力切割主轴可使雕刻速度更为提高。
Italy Well-known air cooling spindle,high precision,long life time,steady working,easy to start up.
Thicken square pipe structrue,well welded,no distortion for whole structure.
Adopt imported square orbit,double slippers.Bearring heavy,working steadily,high precision,and long life time.
DSP controller system with USB interface,working without connecting with computer during wotking and easy to control.
Software:CAD/DAM designing software eg Type3/ArtCAM/Castmate/Wenta ect.
Vacuum Table with 6 vacuum zones,which can adsorb different sizes materials.Options for vacuum pump:vacuum pump made in China or No-oil vacuum pump made in Germany.
Auto Oilliung system.Easy to operate by pressing one key.
Adopt high speed stepper motor and drivers,and two motors for Y axis,Max speed is 25m/min.
Auto Aligning System.
Seperated control system makes operation easily.
option:Ratery Clamp to engrave on Columns.Max is dia 36cm and length 10cm.
技术参数
X、Y轴行程 X Y working area 1300×2500mm
Z轴行程 Z working area 200mm
平台尺寸 Table size 1480×3000mm
最高行进速度 Max feeding ＞25m/min
装夹形式 Work-holding 真空吸附 by suction
处理器 Processor DSP/主频 100MHZ
接口界面 Interface USB
雕刻指令 command G代码＊.uOO*mmg*.plt
软件运行环境 Surroundings for software DSP
功率（不含主轴） Power(not onduct the spindle) 1840W
工作电压 Power 380V 50Hz
主轴功率 Main axle power rate 4.5/6Kw(国产水冷）
主轴转速 Main axle rotating speed 0-24000rpm/min
工作方式 Work Mode 步进Steper
|
| |
|
|
返回到产品展示中心
